种植支持式固定义齿被动就位的临床检测方法

doi:10.12337/zgkqzzxzz.2022.08.008

摘要/Abstract

摘要： 种植支持式固定义齿的长期成功率与其被动就位状态密切相关,因而被动就位的临床检测在种植修复治疗中十分重要。现有证据表明完全的被动就位状态仍无法实现,而一定程度的失配是临床可接受的。被动就位的检测主要涉及被动性与适合性两个方面。被动性检测方法主要是螺钉阻力实验,而适合性检测方法主要包括交替指压法、直视法、探诊法、影像学方法、单螺钉实验法及指示材料法。每种检测方法均有其优势及局限性,本文将就被动就位的定义以及临床常用检测方法进行综述,以期为临床诊疗提供参考。

关键词: 口腔种植, 被动就位, 临床可接受就位水平, 种植支持式固定义齿, 检测方法

Abstract: Passive fit is closely associated with the long-term success rate of implant-supported prostheses. Therefore, clinical assessment of passive fit is important in the implant therapy. Based on the current evidence, an absolutely passive fit cannot be obtained, and a certain level of misfit was considered to be clinically acceptable. Various methods are applied to assess the passive fit of prostheses, which are mainly divided into two aspects: passiveness and marginal fit. The screw resistance test could be used to assess passiveness. Regarding marginal fit, the following methods are available: alternate finger pressure, visual inspection, tactile sensation, radiographs, one-screw test and disclosing materials. Each assessment method has its advantages and limitations. This article briefly reviewed the definition of passive fit and the common clinical assessment methods to provide references for clinical diagnosis and treatment.

Key words: Implant dentistry, Passive fit, Clinically acceptable fit, Implant-supported fixed prostheses, Assessment methods

郭永青,等马允,等于皓. 种植支持式固定义齿被动就位的临床检测方法[J]. 中国口腔种植学杂志, 2022, 27(4): 243-247. DOI: 10.12337/zgkqzzxzz.2022.08.008

Guo Yongqing, Ma Yun, Yu Hao. Clinical assessment of evaluating passive fit of implant-supported fixed prostheses[J].Chinese Journal of Oral Implantology, 2022, 27(4): 243-247.DOI: 10.12337/zgkqzzxzz.2022.08.008.

参考文献

[1] 陈宇. 种植义齿和固定义齿在口腔修复中的对比[J]. 中国口腔种植学杂志,2018,23(3):139-141. DOI:10.3969/j.issn.1007-3957.2018.03.010.
[2] Howe M-S, Keys W, Richards D.Long-term (10-year) dental implant survival: a systematic review and sensitivity meta-analysis[J]. J Dent, 2019, 84: 9-21. DOI: 10.1016/j.jdent.2019.03.008.
[3] Pjetursson B, Asgeirsson A, Zwahlen M, et al.Improvements in implant dentistry over the last decade: comparison of survival and complication rates in older and newer publications[J]. Int J Oral Maxillofac Implants, 2014, 29(Suppl.): 308-324. DOI: 10.11607/jomi.2014suppl.g5.2.
[4] Derks J, Tomasi C.Peri-implant health and disease. A systematic review of current epidemiology[J]. J Clin Periodontol, 2015, 42: S158-S171. DOI: 10.1111/jcpe.12334.
[5] Khouly I, Pardiñas-López S, Ruff RR, et al.Efficacy of growth factors for the treatment of peri-implant diseases: a systematic review and meta-analysis[J]. Clin Oral Investig, 2020, 24(7): 2141-2161. DOI: 10.1007/s00784-020-03240-5.
[6] Pan Y, Tsoi JKH, Lam WYH, et al.Implant framework misfit: a systematic review on assessment methods and clinical complications[J]. Clin Implant Dent Relat Res, 2021, 23(2): 244-258. DOI: 10.1111/cid.12968.
[7] Papaspyridakos P, Chen C-J, Chuang S-K, et al.A systematic review of biologic and technical complications with fixed implant rehabilitations for edentulous patients[J]. Int J Oral Maxillofac Implants, 2012, 27(1): 102-110.
[8] Aglietta M, Siciliano V I, Zwahlen M, et al.A systematic review of the survival and complication rates of implant supported fixed dental prostheses with cantilever extensions after an observation period of at least 5 years[J]. Clin Oral Implants Res, 2009, 20(5): 441-451. DOI: 10.1111/j.1600-0501.2009.01706.x.
[9] Vélez J, Peláez J, López-Suárez C, et al. Influence of implant connection, abutment design and screw insertion torque on implant-abutment misfit[J]. J Clin Med, 2020,24;9(8):2365. DOI: 10.3390/jcm9082365.
[10] 宿玉成. 口腔种植学词典[M]. 北京:人民卫生出版社,2020.
[11] Watanabe F, Uno I, Hata Y, et al.Analysis of stress distribution in a screw-retained implant prosthesis[J]. Int J Oral Maxillofac Implants, 2000, 15(2): 209-218.
[12] Sahin S, Çehreli MC.The significance of passive framework fit in implant prosthodontics: Current Status[J]. Implant Dent, 2001, 10(2): 85-92. DOI: 10.1097/00008505-200104000-0000.
[13] Karl M, Taylor T.Bone adaptation induced by non-passively fitting implant superstructures: a randomized clinical trial[J]. Int J Oral Maxillofac Implants, 2016: 369-375. DOI: 10.11607/jomi.4331.
[14] 陈江. 种植修复体精准被动就位的意义及评价[J].中华口腔医学杂志,2020,55(11):825-830. DOI: 10.3760/cma.j.cn112144-20200622-00358.
[15] Jokstad A, Shokati B.New 3D technologies applied to assess the long-term clinical effects of misfit of the full jaw fixed prosthesis on dental implants[J]. Clin Oral Implants Res, 2015, 26(10): 1129-1134. DOI: 10.1111/clr.12522.
[16] Colpani J T, Borba M, Della Bona Á.Evaluation of marginal and internal fit of ceramic crown copings[J]. Dental Materials, 2013, 29(2): 174-180.
[17] Katsoulis J, Müller P, Mericske-Stern R, et al.CAD/CAM fabrication accuracy of long-vs. short-span implant-supported FDPs[J]. Clin Oral Implants Res, 2015, 26(3): 245-249.
[18] 马允,于皓. 口腔传统种植印模精确性的影响因素及其研究现状[J]. 口腔颌面修复学杂志,2021,22(4):317-320. DOI:10.19748/j.cn.kqxf.1009-3761.2021.04.015.
[19] Buzayan MM, Yunus NB.Passive fit in screw retained multi-unit implant prosthesis understanding and achieving: a review of the literature[J]. J Indian Prosthodont Soc, 2014, 14(1): 16-23. DOI: 10.1007/s13191-013-0343-x.
[20] Abduo J, Judge R.Implications of implant framework misfit: a systematic review of biomechanical sequelae[J]. Int J Oral Maxillofac Implants, 2014, 29(3): 608-621. DOI: 10.11607/jomi.3418.
[21] Katsoulis J, Takeichi T, Gaviria AS, et al.Misﬁt of implant prostheses and its impact on clinical outcomes. Deﬁnition, assessment and a systematic review of the literature[J]. Eur J Oral Implantol, 2017,10(Suppl.1):121-138.
[22] Brånemark PI.Osseointegration and its experimental background[J]. J Prosthet Dent, 1983,50(3):399-410. DOI: 10.1016/s0022-3913(83)80101-2.
[23] Kim Y, Oh T-J, Misch CE, et al.Occlusal considerations in implant therapy: clinical guidelines with biomechanical rationale[J]. Clin Oral Implants Res, 2005, 16(1): 26-35. DOI: 10.1111/j.1600-0501.2004.01067.x.
[24] Andriessen FS, Rijkens DR, van der Meer WJ, et al. Applicability and accuracy of an intraoral scanner for scanning multiple implants in edentulous mandibles: a pilot study[J]. J Prosthet Dent, 2014, 111(3): 186-194. DOI: 10.1016/j.prosdent.2013.07.010.
[25] Jemt T.Failures and complications in 391 consecutively inserted fixed prostheses supported by Brånemark implants in edentulous jaws: a study of treatment from the time of prosthesis placement to the first annual checkup[J]. Int J Oral Maxillofac Implants, 1991, 6(3): 270-276.
[26] Jemt T, Book K.Prosthesis misfit and marginal bone loss in edentulous implant patients[J]. Int J Oral Maxillofac Implants, 1996, 11(5):620-625.
[27] Papaspyridakos P, Lal K, White GS, et al.Effect of splinted and nonsplinted impression techniques on the accuracy of fit of fixed implant prostheses in edentulous patients: a comparative study[J]. Int J Oral Maxillofac Implants, 2011, 26(6): 1267-1272.
[28] AL-Meraikhi H, Yilmaz B, McGlumphy E, et al. In vitro fit of CAD-CAM complete arch screw-retained titanium and zirconia implant prostheses fabricated on 4 implants[J]. J Prosthet Dent, 2018, 119(3): 409-416. DOI: 10.1016/j.prosdent.2017.04.023.
[29] Kunavisarut C, Lang LA, Stoner BR, et al.Finite element analysis on dental implant-supported prostheses without passive fit[J]. J Prosthodont, 2002, 11(1): 30-40. DOI: 10.1111/j.1532-849x.2002.00030.x.
[30] 赵勇,宫苹. 种植义齿被动适合性的影响因素及提高方法[J]. 国外医学(口腔医学分册),2003, 30(4):316-317. DOI:10.3969/j.issn.1673-5749.2003.04.024.
[31] Henry PJ.An alternative method for the production of accurate casts and occlusal records in osseointegrated implant rehabilitation[J]. J Prosthet Dent, 1987, 58(6):694-697. DOI: 10.1016/0022-3913(87)90421-5.
[32] Adell R, Eriksson B, Lekholm U, et al.Long-term follow-up study of osseointegrated implants in the treatment of totally edentulous jaws[J]. Int J Oral Maxillofac Implants, 1990, 5(4): 347-359.
[33] Riedy SJ, Lang BR, Lang BE.Fit of implant frameworks fabricated by different techniques[J]. J Prosthet Dent, 1997, 78(6): 596-604. DOI: 10.1016/s0022-3913(97)70011-8.
[34] Kan JY, Rungcharassaeng K, Bohsali K, et al.Clinical methods for evaluating implant framework fit[J]. J Prosthet Dent, 1999, 81(1):7-13. DOI: 10.1016/s0022-3913(99)70229-5.
[35] Abduo J, Bennani V, Waddell N, et al.Assessing the fit of implant fixed prostheses: a critical review[J]. Int J Oral Maxillofac Implants, 2010, 25(3):506-515.
[36] Hayashi M, Wilson NHF, Ebisu S, et al.Influence of explorer tip diameter in identifying restoration margin discrepancies[J]. J Dent, 2005, 33(8): 669-674. DOI: 10.1016/j.jdent.2005.01.006.
[37] Cameron SM, Joyce A, Brousseau JS, et al.Radiographic verification of implant abutment seating[J]. J Prosthet Dent, 1998, 79(3):298-303. DOI: 10.1016/s0022-3913(98)70241-0.
[38] Eisenmann E, Mokabberi A, Walter MH, et al.Improving the fit of implant-supported superstructures using the spark erosion technique[J]. Int J Oral Maxillofac Implants, 2004, 19(6): 810-818.
[39] Tan KB, Rubenstein JE, Nicholls JI, et al.Three-dimensional analysis of the casting accuracy of one-piece, osseointegrated implant-retained prostheses[J]. Int J Oral Maxillofac Implants, 1993, 6(4): 346-363.
[40] Cheshire PD, Hobkirk JA.An in vivo quantitative analysis of the fit of Nobel Biocare implant superstructures[J]. J Oral Rehabil, 1996, 23(11): 782-789. DOI: 10.1046/j.1365-2842.1996.d01-193.x.
[41] Wicks RA, deRijk WG, Windeler AS. An evaluation of fit in osseointegrated implant components using torque/turn analysis[J]. J Prosthodont, 1994, 3(4):206-212. DOI: 10.1111/j.1532-849x.1994.tb00157.x.
[42] Calderini A, Maiorana C, Garlini G, et al.T. A simplified method to assess precision of fit between framework and supporting implants: a preliminary study[J]. Int J Oral Maxillofac Implants, 2007, 22(5):831-838.
[43] Papaspyridakos P, Chen Y, Gonzalez-Gusmao I, et al.Complete digital workflow in prosthesis prototype fabrication for complete-arch implant rehabilitation: a technique[J]. J Prosthet Dent, 2019, 122(3): 189-192. DOI: 10.1016/j.prosdent.2019.02.004.
[44] Figueras-Alvarez O, Cantó-Navés O, Real-Voltas F, et al.Protocol for the clinical assessment of passive fit for multiple implant-supported prostheses: a dental technique[J]. J Prosthet Dent, 2021, 126(6): 727-730. DOI: 10.1016/j.prosdent.2020.10.001.