钛阳极氧化表面性能的研究进展

doi:10.12337/zgkqzzxzz.2021.06.011

中国口腔种植学杂志 ›› 2021, Vol. 26 ›› Issue (3): 202-205.DOI: 10.12337/zgkqzzxzz.2021.06.011

钛阳极氧化表面性能的研究进展

吕凌峰, 吴东

福建医科大学口腔医学院福建医科大学附属口腔医院种植一科福建医科大学口腔颅颌面种植研究中心 350025

收稿日期:2020-10-28 出版日期:2021-06-10 发布日期:2021-07-14
通讯作者: 吴东,Email：wudong510_5@hotmail.com,电话：0591-83265772
作者简介:吕凌峰, 住院医师、硕士研究生,研究方向：口腔种植学相关研究;吴东, 主任医师、副教授、硕士生导师、口腔颅颌面种植研究中心主任、附属口腔医院种植科副主任,研究方向：口腔种植学相关研究

Research progress on surface properties of titanium anodizing

Lv Lingfeng, Wu Dong

School of Stomatology, Department of Implant, affiliated Stomatological Hospital of Fujian Medical University,Oral Craniofacial Implant Research Center of Fujian Medical University,Fujian 350025,China

Received:2020-10-28 Online:2021-06-10 Published:2021-07-14
Contact: Wu Dong, Email: wudong510_5@hotmail.com, Tel:0086-591-83265772

摘要/Abstract

摘要： 种植修复方式的愈加成熟,得益于国内外学者对种植体形态、表面性能等的广泛研究。钛作为种植体原材料,具有优异的生物相容性,然而由于纯钛材料的生物惰性,其表面处理向来是研究的热点。阳极氧化是目前成熟的表面处理技术,通过阳极氧化制备的具有多孔形貌的氧化钛涂层对钛的表面性能有显著改善。以下仅对阳极氧化钛表面性能及临床应用的研究进展作一综述分析。

关键词: 钛, 阳极氧化, 种植体, 表面性能, 成骨, 抗菌, 临床应用

Abstract: The implant restoration is becoming more and more mature, due to the extensive research on implant morphology and surface properties by scholars domestic and international.Titanium, as materials of implant, has excellent biocompatibility. However, due to the biological inertia of the surface of pure titanium, its surface treatment has always been the focus of research.Anodization is a mature surface treatment technology nowadays, and the titanium oxide coating with porous morphology prepared by anodization has been proved to be an effective way to improve the biological activity of titanium surface.In this paper, the research progress and clinical application of anodized titanium surface are reviewed and analyzed.

Key words: Titanium, Anodic oxidation, Implant, Surface properties, Osteogenesis, Anti-bacterial, Clinical application

吕凌峰,等吴东. 钛阳极氧化表面性能的研究进展[J]. 中国口腔种植学杂志, 2021, 26(3): 202-205. DOI: 10.12337/zgkqzzxzz.2021.06.011

Lv Lingfeng, Wu Dong. Research progress on surface properties of titanium anodizing[J].Chinese Journal of Oral Implantology, 2021, 26(3): 202-205.DOI: 10.12337/zgkqzzxzz.2021.06.011.

参考文献

[1] Pierre C, Bertrand G, Rey C, et al.Calcium phosphate coatings elaborated by the soaking process on titanium dental implants: Surface preparation, processing and physical-chemical characterization[J]. Dent Mater, 2019,35(2):e25-e35. DOI: 10.1016/j.dental.2018.10.005.
[2] Liu P, Hao Y, Zhao Y, et al.Surface modification of titanium substrates for enhanced osteogenetic and antibacterial properties[J]. Colloids Surf B Biointerfaces, 2017,160:110-116. DOI: 10.1016/j.colsurfb.2017.08.044.
[3] Wang Q, Zhou P, Liu S, et al.Multi-Scale Surface Treatments of Titanium Implants for Rapid Osseointegration: A Review[J]. Nanomaterials (Basel), 2020,10(6):1244. DOI: 10.3390/nano10061244.
[4] Li G,Cao H,Zhang W et al.Enhanced Osseointegration of Hierarchical Micro/Nanotopographic Titanium Fabricated by Microarc Oxidation and Electrochemical Treatment.[J] .ACS Appl Mater Interfaces, 2016, 8: 3840-52. DOI: 10.1021/acsami.5b10633.
[5] Zhou W, Huang O, Gan Y, et al.Effect of titanium implants with coatings of different pore sizes on adhesion and osteogenic differentiation of BMSCs[J]. Artif Cells Nanomed Biotechnol, 2019,47(1):290-299. DOI: 10.1080/21691401.2018.1553784.
[6] Karimi N, Kharaziha M, Raeissi K.Electrophoretic deposition of chitosan reinforced graphene oxide-hydroxyapatite on the anodized titanium to improve biological and electrochemical characteristics[J]. Mater Sci Eng C Mater Biol Appl, 2019,98:140-152. DOI: 10.1016/j.msec.2018.12.136.
[7] Sharma A, McQuillan AJ, Sharma LA, et al.Spark anodization of titanium-zirconium alloy: surface characterization and bioactivity assessment[J]. J Mater Sci Mater Med, 2015,26(8):221. DOI: 10.1007/s10856-015-5555-7.
[8] Sharma A, McQuillan AJ, Shibata Y, et al.Histomorphometric and histologic evaluation of titanium-zirconium (aTiZr) implants with anodized surfaces[J]. J Mater Sci Mater Med, 2016,27(5):86. DOI: 10.1007/s10856-016-5695-4.
[9] Shen X, Al-Baadani MA, He H, et al.Antibacterial and osteogenesis performances of LL37-loaded titania nanopores in vitro and in vivo[J]. Int J Nanomedicine, 2019,14:3043-3054. DOI: 10.2147/IJN.S198583.
[10] von Wilmowsky C, Bauer S, Roedl S, et al.The diameter of anodic TiO₂ nanotubes affects bone formation and correlates with the bone morphogenetic protein-2 expression in vivo[J]. Clin Oral Implants Res, 2012,23(3):359-366. DOI: 10.1111/j.1600-0501.2010.02139.x.
[11] Wang N, Li H, Lü W, et al.Effects of TiO₂ nanotubes with different diameters on gene expression and osseointegration of implants in minipigs[J]. Biomaterials, 2011,32(29):6900-6911. DOI: 10.1016/j.biomaterials.2011.06.023.
[12] A.Sasireka,Renji Rajendran,V.Raj.In vitro corrosion resistance and cytocompatibility of minerals substituted apatite/biopolymers duplex coatings on anodized Ti for orthopedic implant applications[J]. Arabian Journal of Chemistry,2020,13(8):6312-6326. DOI: 10.1016/j.arabjc.2020.05.031
[13] Mansoorianfar M, Khataee A, Riahi Z, et al.Scalable fabrication of tunable titanium nanotubes via sonoelectrochemical process for biomedical applications[J]. Ultrason Sonochem, 2020,64:104783. DOI: 10.1016/j.ultsonch.2019.104783.
[14] Dong Y, Ye H, Liu Y, et al.pH dependent silver nanoparticles releasing titanium implant: A novel therapeutic approach to control peri-implant infection[J]. Colloids Surf B Biointerfaces, 2017,158:127-136. DOI: 10.1016/j.colsurfb.2017.06.034.
[15] Radtke A, Grodzicka M, Ehlert M, et al.Studies on Silver Ions Releasing Processes and Mechanical Properties of Surface-Modified Titanium Alloy Implants[J]. Int J Mol Sci, 2018,19(12). DOI: 10.3390/ijms19123962.
[16] Huirong Li,Qiang Cui,Bo Feng,et al.Antibacterial activity of TiO 2 nanotubes: Influence of crystal phase, morphology and Ag deposition[J]. Applied Surface Science,2013,284:179-183. DOI:10.1016/j.apsusc.2013.07.076.
[17] Liu W, Su P, Gonzales A 3rd, et al.Optimizing stem cell functions and antibacterial properties of TiO2 nanotubes incorporated with ZnO nanoparticles: experiments and modeling[J]. Int J Nanomedicine, 2015,10:1997-2019. DOI: 10.2147/IJN.S74418.
[18] Wang Q, Huang JY, Li HQ, et al.Recent advances on smart TiO(2) nanotube platforms for sustainable drug delivery applications[J]. Int J Nanomedicine, 2017,12:151-165. DOI: 10.2147/IJN.S117498.
[19] Aiempanakit K, Jessadaluk S, Tongmaha S, et al.Vertical Alignment TiO2 Nanotube Based on Ti Film Prepared via Anodization Technique[J]. Key Engineering Materials, 2016, 675-676:167-170. DOI:10.4028/www.scientific.net/KEM.675-676.167.
[20] Rocci A, Martignoni M, Gottlow J.Immediate loading of Brnemark System TiUnite and machined-surface implants in the posterior mandible: a randomized open-ended clinical trial.[J]. Clinical Implant Dentistry and Related Research, 2010, 5(s1):57-63. DOI: 10.1111/j.1708-8208.2003.tb00016.x.
[21] Degidi M, Perrotti V, Piattelli A.Immediately loaded titanium implants with a porous anodized surface with at least 36 months of follow-up[J]. Clin Implant Dent Relat Res, 2006,8(4):169-177. DOI: 10.1111/j.1708-8208.2006.00008.x.
[22] Pimentel Lopes de Oliveira GJ, Leite FC, Pontes AE, et al.Comparison of the Primary and Secondary Stability of Implants with Anodized Surfaces and Implants Treated by Acids: A Split-Mouth Randomized Controlled Clinical Trial[J]. Int J Oral Maxillofac Implants, 2016,31(1):186-190. DOI: 10.11607/jomi.4212.
[23] Rocci A, Rocci M, Rocci C, et al.Immediate loading of Brånemark system TiUnite and machined-surface implants in the posterior mandible, part II: a randomized open-ended 9-year follow-up clinical trial[J]. Int J Oral Maxillofac Implants, 2013,28(3):891-895. DOI: 10.11607/jomi.2397.
[24] Tian C, Tseng S, Hung WY.Redesigning the macrostructure of dental implants[J]. Dent Today, 2012,31(4):88, 90-91.

钛阳极氧化表面性能的研究进展

Research progress on surface properties of titanium anodizing

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	周延民, 秦秋月. 上颌窦三维成骨模式促进上颌窦内成骨的临床意义[J]. 中国口腔种植学杂志, 2023, 28(2): 69-76.
[2]	秦欣玉, 张亮, 陈莹莹, 韩泽奎, 宿玉成, 王心彧. 3D打印镍钛植入物表面去合金化处理及细胞相容性研究[J]. 中国口腔种植学杂志, 2023, 28(2): 77-81.
[3]	罗桂生, 刘雨蒙, 王鹏来, 袁长永. 微量元素改性PEEK种植体的研究进展[J]. 中国口腔种植学杂志, 2023, 28(2): 109-113.
[4]	刘月, 赵雅君, 刘金, 杜密, 兰晶. 种植体周微生物特点及其在疾病状态下的变化[J]. 中国口腔种植学杂志, 2023, 28(1): 35-39.
[5]	程雯, 马晓婷, 申亚杰, 吕守印, 韶波. 纳米银抗菌材料在口腔种植应用中的研究进展[J]. 中国口腔种植学杂志, 2023, 28(1): 40-46.
[6]	邓磊, 黄海涛. 上颌窦底提升术后窦腔内成骨机制的研究进展[J]. 中国口腔种植学杂志, 2023, 28(1): 53-57.
[7]	皮雪敏, 刘倩, 陈德平, 任斌, 潘红, 宿玉成. 上颌窦底提升方案的决策原则（三）[J]. 中国口腔种植学杂志, 2023, 28(1): 58-66.
[8]	季平. 3D打印个性化钛网用于复杂骨缺损增量治疗的研究进展[J]. 中国口腔种植学杂志, 2022, 27(6): 334-339.
[9]	顾腾, 王旭冉, 王鹏来. 聚醚醚酮改性应用于种植体的研究进展[J]. 中国口腔种植学杂志, 2022, 27(6): 371-375.
[10]	中华口腔医学会口腔种植专业委员会. 上颌窦底提升并发症的专家共识：种植体脱入上颌窦（第一版）[J]. 中国口腔种植学杂志, 2022, 27(5): 264-268.
[11]	张启航, 龚佳明, 苟萍, 余佳颖, 薄磊, 余占海. 种植体间距对种植体周骨吸收影响的Meta分析[J]. 中国口腔种植学杂志, 2022, 27(5): 304-311.
[12]	王婷婷, 王凤, 吴轶群. 3D打印数字化个性化钛网在牙槽嵴引导骨再生中的临床应用[J]. 中国口腔种植学杂志, 2022, 27(4): 208-216.
[13]	中华口腔医学会口腔种植专业委员会. 上颌窦底提升并发症的专家共识：种植体周病（第一版）[J]. 中国口腔种植学杂志, 2022, 27(3): 135-139.
[14]	郑泽君, 程瑞修, 李长清, 孙大卫, 张领辉, 宋丽丽. 内镜辅助侧壁开窗上颌窦底提升的临床效果（附25例病例报告）[J]. 中国口腔种植学杂志, 2022, 27(3): 169-172.
[15]	龚佳明, 赵瑞敏, 王佳, 戴志明, 余占海, 殷丽华. 种植体周囊肿的系统性文献综述[J]. 中国口腔种植学杂志, 2022, 27(3): 181-187.