口腔种植治疗中的数字化数据采集技术

doi:10.12337/zgkqzzxzz.2021.04.007

摘要/Abstract

摘要： 随着数字化技术的迅猛发展,各类数字化技术正在逐步改变着口腔种植领域临床医师的诊疗方式和治疗理念。尤其是CBCT、数字化口内扫描、口外扫描、面部扫描、下颌运动分析系统、数字化咬合分析系统等数据采集技术,以其高精度、高效率、易传输、低污染等优势逐渐在各大医院推广和普及。近期,使用各种数字化采集数据构建“虚拟患者”,解决无牙颌等种植中的疑难杂症,已成为口腔医学领域临床研究的热点之一。本文综述口腔种植治疗过程中的数字化数据采集技术的特点及其临床应用现状。

关键词: 数字化技术, 口腔种植, 信息采集, 扫描, 虚拟患者

Abstract: With the rapid development of digital technology, diagnosis and treatment methods of the clinicians have been changed by these digital technologies in the field of dental implant. In particular, data acquisition technology, such as CBCT, digital intraoral scan, extraoral scan, facial scan, virtual facebow technique, are gradually popularized in medical institutions with its high precision, high efficiency, convenient transmission and low pollution. Recently, it has become one of the focuses to build "virtual patient" using various digital data to solve complex cases such as edentulous patients in implant dentistry. This paper summarized the characteristics and clinical application of digital data acquisition technology in the process of dental implant treatment.

Key words: Digital technology, Dental implant, Data acquisition, Scan, Virtual patient

熊佳璧,等孙为,等施斌. 口腔种植治疗中的数字化数据采集技术[J]. 中国口腔种植学杂志, 2021, 26(2): 114-119. DOI: 10.12337/zgkqzzxzz.2021.04.007

Xiong Jiabi, Sun Wei, Shi Bin. Digital data acquisition technology in oral implantology[J].Chinese Journal of Oral Implantology, 2021, 26(2): 114-119.DOI: 10.12337/zgkqzzxzz.2021.04.007.

参考文献

[1] Creagh J, Bohner L, Sesma N, et al.Integrating a facially driven treatment planning to the digital workflow for rehabilitation of edentulous arches: a case report[J]. J Contemp Dent Pract, 2020,21(12):1393-1397.
[2] Fukami K, Shiozaki K, Mishima A, et al.Bifid mandibular canal: confirmation of limited cone beam CT findings by gross anatomical and histological investigations[J]. Dentomaxillofac Radiol, 2012,41(6):460-465. DOI: 10.1259/dmfr/60245722.
[3] Aksoy U, Aksoy S, Orhan K.A cone-beam computed tomography study of the anatomical relationships between mandibular teeth and the mandibular canal, with a review of the current literature[J]. Microsc Res Tech, 2018,81(3):308-314. DOI: 10.1002/jemt.22980.
[5] Van Dessel J, Nicolielo LF, Huang Y, et al.Accuracy and reliability of different cone beam computed tomography (CBCT) devices for structural analysis of alveolar bone in comparison with multislice CT and micro-CT[J]. Eur J Oral Implantol, 2017,10(1):95-105.
[5] de Castro HS, Kehrwald R, Matheus RA, et al.Influence of low-dose protocols of CBCT on dental implant planning[J]. Int J Oral Maxillofac Implants, 2021,36(2):307-312. DOI: 10.11607/jomi.8773.
[6] Dusseldorp JK, Stamatakis HC, Ren Y.Soft tissue coverage on the segmentation accuracy of the 3D surface-rendered model from cone-beam CT[J]. Clin Oral Investig, 2017,21(3):921-930. DOI: 10.1007/s00784-016-1844-x.
[7] Nagarajappa AK, Dwivedi N, Tiwari R.Artifacts: The downturn of CBCT image[J]. J Int Soc Prev Community Dent, 2015,5(6):440-445. DOI: 10.4103/2231-0762.170523.
[8] Al-Rimawi A, Shaheen E, Albdour EA, et al.Trueness of cone beam computed tomography versus intra-oral scanner derived three-dimensional digital models: An ex vivo study[J]. Clin Oral Implants Res, 2019,30(6):498-504. DOI: 10.1111/clr.13434.
[9] Skjerven H, Olsen-Bergem H, Rønold HJ, et al.Comparison of postoperative intraoral scan versus cone beam computerised tomography to measure accuracy of guided implant placement-A prospective clinical study[J]. Clin Oral Implants Res, 2019,30(6):531-541. DOI: 10.1111/clr.13438.
[10] Schnutenhaus S, Knipper A, Wetzel M, et al.Accuracy of computer-assisted dynamic navigation as a function of different intraoral reference systems: an in vitro study[J]. Int J Environ Res Public Health, 2021,18(6). DOI: 10.3390/ijerph18063244.
[11] Gómez-Polo M, Ballesteros J, Padilla PP, et al.Merging intraoral scans and CBCT: a novel technique for improving the accuracy of 3D digital models for implant- supportedcomplete-arch fixed dental prostheses[J]. Int J Comput Dent, 2021,24(2):117-123.
[12] Jamjoom FZ, Yilmaz B, Johnston WM.Impact of number of registration points on thepositional accuracy of a prosthetic treatment plan incorporated into a cone beam computed tomography scan by surface scan registration: An in vitro study[J]. Clin Oral Implants Res, 2019,30(8):826-832. DOI: 10.1111/clr.13490.
[13] Mandelli F, Ferrini F, Gastaldi G, et al.Improvement of a digital impression withconventional materials: overcoming intraoral ocanner limitations[J]. Int J Prosthodont, 2017,30(4):373-376. DOI: 10.11607/ijp.5138.
[14] Schepke U, Meijer HJ, Kerdijk W, et al.Digital versus analog complete-arch impressions forsingle-unit premolar implant crowns: Operating time and patient preference[J]. J Prosthet Dent, 2015,114(3):403-406.e1. DOI: 10.1016/j.prosdent.2015.04.003.
[15] Gallardo YR, Bohner L, Tortamano P, et al.Patient outcomes and procedure working time fordigital versus conventional impressions: A systematic review[J]. J Prosthet Dent, 2018,119(2):214-219. DOI: 10.1016/j.prosdent.2017.07.007.
[16] Amin S, Weber HP, Finkelman M, et al.Digital vs.conventional full-arch implant impressions: a comparative study[J]. Clin Oral Implants Res, 2017,28(11):1360-1367. DOI: 10.1111/clr.12994.
[17] Marghalani A, Weber HP, Finkelman M, et al.Digital versus conventional implant impressions for partially edentulous arches: An evaluation of accuracy[J]. J Prosthet Dent, 2018,119(4):574-579. DOI: 10.1016/j.prosdent.2017.07.002.
[18] Iturrate M, Minguez R, Pradies G, et al.Obtaining reliable intraoral digital scans for an implant-supported complete-arch prosthesis: A dental technique[J]. J Prosthet Dent, 2019,121(2):237-241. DOI: 10.1016/j.prosdent.2018.03.008.
[19] Andriessen FS, Rijkens DR, van der Meer WJ, et al.Applicability and accuracy of an intraoral scanner for scanning multiple implants in edentulous mandibles: a pilot study[J]. J Prosthet Dent, 2014,111(3):186-194. DOI: 10.1016/j.prosdent.2013.07.010.
[20] Wismeijer D, Joda T, Flügge T, et al.Group 5 ITI consensus report: digital technologies[J] Clin Oral Implants Res, 2018,29 Suppl 16:436-442. DOI: 10.1111/clr.13309.
[21] Nagy Z, Simon B, Mennito A, et al.Comparing the trueness of seven intraoral scanners and a physical impression on dentate human maxilla by a novel method[J]. BMC Oral Health, 2020,20(1):97. DOI: 10.1186/s12903-020-01090-x.
[22] Wei D, Di P, Tian J, et al.Evaluation of intraoral digital impressions for obtaining gingival contour in the esthetic zone: accuracy outcomes[J]. Clin Oral Investig, 2020,24(4):1401-1410. DOI: 10.1007/s00784-019-03105-6.
[23] da Silva Marques DN, Marques Pinto RJ, Alves R, et al.Soft tissue replication in single unit implant impressions-A three dimensional clinical study[J]. J Esthet Restor Dent, 2019,31(4):359-368. DOI: 10.1111/jerd.12481.
[24] Duran JC, Aguirre F, Pino R, et al.Dimensional variations in the soft tissue profile after removal of implant-supported fixed interim restorations: a pilot clinical study[J]. Implant Dent, 2018,27(1):28-32. DOI: 10.1097/ID.0000000000000720.
[25] Stefanelli LV, Franchina A, Pagliarulo M, et al.Management of a complex case during COVID-19 time using one-day digital dentistry: a dase report[J]. J Contemp Dent Pract, 2020,21(11):1284-1292.
[26] Zimmermann M, Mehl A.Virtual smile design systems: a current review[J]. Int J Comput Dent, 2015,18(4):303-317.
[27] Katase H, Kanazawa M, Inokoshi M, et al.Face simulation system for complete dentures by applying rapid prototyping[J]. J Prosthet Dent, 2013,109(6):353-360. DOI: 10.1016/S0022-3913(13)60316-9.
[28] 杨敏, 刘福祥.激光扫描在头面部软组织三维重建和测量中的应用[J]. 国际口腔医学杂志,2010,37(3):351-354. DOI: 10.3969/j.issn.1673-5749.2010.03.030.
[29] Zhao YJ, Xiong YX, Wang Y.Three-dimensional accuracy of facial scan for facial deformities in clinics: a new evaluation method for facial scanner accuracy[J]. PLoS One, 2017,12(1):e0169402. DOI: 10.1371/journal.pone.0169402.
[30] Ritschl LM, Wolff KD, Erben P, et al.Simultaneous, radiation-free registration of the dentoalveolar position and the face by combining 3D photography with a portable scanner and impression-taking[J]. Head Face Med, 2019,15(1):28. DOI: 10.1186/s13005-019- 0212-x.
[31] Marchack BW, Sharma A, Lefebvre CA.The journal of prosthetic dentistry: a historical perspective[J]. J Prosthet Dent, 2018,119(4):497-498. DOI: 10.1016/j.prosdent.2018.02.009.
[32] Amornvit P, Sanohkan S.The accuracy of digital face scans obtained from 3D scanners: an In vitro study[J]. Int J Environ Res Public Health, 2019,16(24). DOI: 10.3390/ijerph 16245061.
[33] 孙方方, 张丽仙, 吴国锋.下颌运动轨迹记录的数字化技术[J]. 实用口腔医学杂志,2020,36(6):980-984. DOI: 10.3969/j.issn.1001-3733.2020.06.035.
[34] 吴国锋.面弓记录的临床规范化操作[J]. 实用口腔医学杂志,2017,33(04):567-570.
[35] Ahn SJ, Tsou L, Antonio Sánchez C, et al.Analyzing center of rotation during opening and closing movements of the mandible using computer simulations[J]. J Biomech, 2015,48(4):666-671. DOI: 10.1016/j.jbiomech.2014.12.041.
[36] Hagiwara Y, Narita T, Araki M, et al.Repair of a multiple implant-supported fixed superstructure with a metal-ceramic resin-bonded fixed partial denture: a clinical report[J]. J Oral Implantol, 2014,40 Spec No:371-374. DOI: 10.1563/AAID-JOI-D-12-00036.
[37] 阚娜.全口义齿修复前干预对修复满意度影响的研究[J]. 国际老年医学杂志,2014,35(6): 260-262. DOI: 10.3969/j.issn.1674-7593.2014.06.007.
[38] 邓华颉, 王芳, 钟晓霞.T-Scan咬合分析系统对全口义齿咬合关系的研究[J]. 广西医科大学学报,2015,32(3):408-409.
[39] Ayuso-Montero R, Mariano-Hernandez Y, Khoury-Ribas L, et al.Reliability and validity of T-scan and 3D intraoral scanning for measuring the occlusal contact Area[J]. J Prosthodont, 2020,29(1):19-25. DOI: 10.1111/jopr.13096.
[40] Luo Q, Ding Q, Zhang L, et al.Analyzing the occlusion variation of single posterior implant-supported fixed prostheses by using the T-scan system: a prospective 3-year follow-up study[J]. J Prosthet Dent, 2020,123(1):79-84. DOI: 10.1016/j.prosdent.2018.12.012.
[41] Madani AS, Nakhaei M, Alami M, et al.Post-insertion posterior single-implant occlusion changes at different intervals: a T-scan computerized occlusal analysis[J]. J Contemp Dent Pract, 2017,18(10):927-932. DOI: 10.5005/jp-journals-10024-2151.
[42] da Silva Marques DN, Marques Pinto RJ, Alves R, et al.Soft tissue replication in single unit implant impressions-A three dimensional clinical study[J]. J Esthet Restor Dent, 2019,31(4):359-368. DOI: 10.1111/jerd.12481.

[1]	李效宇, 何捷, 王雪珂, 段静旖, 葛畅, 孟维艳. 应用骨胶原结合帐篷技术行上颌后牙连续缺失垂直骨增量一例[J]. 中国口腔种植学杂志, 2023, 28(2): 97-101.
[2]	陈江. 机器人在口腔种植领域的应用[J]. 中国口腔种植学杂志, 2022, 27(5): 274-279.
[3]	郭永青, 马允, 于皓. 种植支持式固定义齿被动就位的临床检测方法[J]. 中国口腔种植学杂志, 2022, 27(4): 243-247.
[4]	苏天月, 滕微微, 王琦, 舒倩怡, 周立波. 口腔种植体植入精度评估方法的应用进展[J]. 中国口腔种植学杂志, 2022, 27(4): 248-253.
[5]	蒋瑞芳, 张艳芳, 李雪, 刘浏, 薛芃. 动态导航技术在口腔种植教学中的应用研究[J]. 中国口腔种植学杂志, 2022, 27(4): 254-258.
[6]	倪婷, 张亮, 韩泽奎, 王心彧, 段峰. 数字化导板辅助种植6颗平行种植体精确度分析[J]. 中国口腔种植学杂志, 2022, 27(3): 140-146.
[7]	付丽, 徐彦雪, 王林. 口腔种植学“课程思政”教学的初步探索[J]. 中国口腔种植学杂志, 2022, 27(3): 188-192.
[8]	罗少康, 李树春. 侧壁开窗上颌窦底提升的术中并发症研究进展[J]. 中国口腔种植学杂志, 2022, 27(2): 119-123.
[9]	蓝耕良, 陶宝鑫, 黄伟, 王凤, 李顺顺, 吴轶群. 动态导航引导颧种植体植入的临床工作流程[J]. 中国口腔种植学杂志, 2022, 27(1): 9-15.
[10]	齐俊男, 付丽. 巨噬细胞在骨修复及生物材料整合中的作用[J]. 中国口腔种植学杂志, 2022, 27(1): 54-57.
[11]	满毅, 刘菁晶. 一种用于重建严重吸收牙槽嵴的技术介绍与改良思路：栅栏技术[J]. 中国口腔种植学杂志, 2021, 26(6): 349-353.
[12]	甄子澄, 燕寒, 朱红梅, 张燕. 口腔种植修复专科电子病历系统的开发和应用[J]. 中国口腔种植学杂志, 2021, 26(6): 391-395.
[13]	赵瑜越, 黄雁红, 黄英, 陈潇, 容明灯, 张雪洋. 无牙颌种植修复中的牙合学要素[J]. 中国口腔种植学杂志, 2021, 26(6): 400-404.
[14]	章雯, 顾新华. 侧壁开窗上颌窦底提升的骨窗设计研究进展[J]. 中国口腔种植学杂志, 2021, 26(5): 334-338.
[15]	中华口腔医学会口腔种植专业委员会. “中华口腔医学会口腔种植专业委员会第十二次全国口腔种植学术大会”会议简报[J]. 中国口腔种植学杂志, 2021, 26(4): 264-274.