数字化颌位关系记录与转移方法的研究进展

doi:10.12337/zgkqzzxzz.2024.06.004

中国口腔种植学杂志 ›› 2024, Vol. 29 ›› Issue (3): 212-217.DOI: 10.12337/zgkqzzxzz.2024.06.004

• “先天缺牙的相关治疗及进展”重点栏目 • 上一篇下一篇

数字化颌位关系记录与转移方法的研究进展

满毅, 蓝冬萍

四川大学口腔疾病研究国家重点实验室四川大学华西口腔医院种植科 610041

收稿日期:2024-02-08 出版日期:2024-06-30 发布日期:2024-06-28
通讯作者: 满毅,Email：manyi780203@126.com,电话：028-85503579
作者简介:满毅教授，四川大学华西口腔医院种植科主任，种植教研室主任，博士研究生导师。中华口腔医学会口腔种植专业委员会副主任委员、四川省口腔种植专业委员会前任主任委员，口腔数字化产业分会副会长，国际骨再生基金Osteology Foundation中国区执行委员会（NOG China）会长，国际口腔种植学会ITI中国分会候任主席。

Research progress on digital methods for recording and transferring maxillomandibular relationship

Man Yi, Lan Dongping

State Key Laboratory of Oral Diseases and National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Department of Oral Implantology, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, Sichuan, China

Received:2024-02-08 Online:2024-06-30 Published:2024-06-28
Contact: Man Yi, Email: manyi780203@126.com, Tel:0086-28-85503579

摘要/Abstract

摘要： 近年来,口腔数字化技术的日益成熟开启了全口种植修复的新时代。颌位关系的正确记录和转移是全口义齿修复成功的先决条件之一,相较于传统技术,数字化技术的应用可缩短患者的诊疗周期,提高诊疗效率。本文阐述了数字化技术在记录和转移无牙颌患者颌位关系时的应用和进展,深入探讨口腔数字化为临床医生带来的机遇与挑战,以期为临床医生在全口数字化技术的应用方面提供参考。

关键词: 无牙颌, 数字化流程, 颌位关系

Abstract: In recent years, the advancing development of digital dental technology has heralded a new era in full-arch implant restoration. A crucial element for successful complete denture is the accurate recording and transfer of the maxillomandibular relationship. Compared to traditional methods, digital technology has the potential to shorten the treatment cycle and improve the efficiency of diagnosis and treatment. This article elaborates on the application and advances of digital technology in recording and transferring the maxillomandibular relationship in edentulous patients. The opportunities and challenges presented by the digitization of dental technology to clinicians will be discussed, with the aim of providing them with a valuable reference.

Key words: Edentulism, Digital clinical workflow, Maxillomandibular relationship

满毅,等蓝冬萍. 数字化颌位关系记录与转移方法的研究进展[J]. 中国口腔种植学杂志, 2024, 29(3): 212-217. DOI: 10.12337/zgkqzzxzz.2024.06.004

Man Yi, Lan Dongping. Research progress on digital methods for recording and transferring maxillomandibular relationship[J].Chinese Journal of Oral Implantology, 2024, 29(3): 212-217.DOI: 10.12337/zgkqzzxzz.2024.06.004.

参考文献

[1] 王兴. 第四次全国口腔健康流行病学调查报告[M]. 北京:人民卫生出版社, 2018.
[2] Cunha-Cruz J, Hujoel PP, Nadanovsky P.Secular trends in socio-economic disparities in edentulism: USA, 1972-2001[J]. J Dent Res, 2007,86(2):131-136. DOI: 10.1177/154405910708600205.
[3] Emami E, Michaud PL, Sallaleh I, et al.Implant-assisted complete prostheses[J]. Periodontol 2000, 2014,66(1):119-131. DOI: 10.1111/prd.12041.
[4] Li W, Xie Q, Wang Y, et al.Quantitative evaluation of edentulous maxillomandibular relationship record using diagnostic complete dentures fabricated by CAD and 3D printing[J]. J Oral Sci, 2022,64(1):59-62. DOI: 10.2334/josnusd.21-0382.
[5] Ivanhoe JR, Cibirka RM, Parr GR.Treating the modern complete denture patient: a review of the literature[J]. J Prosthet Dent, 2002,88(6):631-635. DOI: 10.1067/mpr.2002.130147.
[6] Jayachandran S, Grey N.Fabrication of occlusal rims to record the maxillomandibular relation for complete dentures[J]. J Prosthet Dent, 2014,112(2):383-386. DOI: 10.1016/j.prosdent.2013.08.022.
[7] Han G, Li J, Wang S, et al.In-vitro assessment of the accuracy and reliability of mandibular dental model superimposition based on voxel-based cone-beam computed tomography registration[J]. Korean J Orthod, 2019,49(2):97-105. DOI: 10.4041/kjod.2019.49.2.97.
[8] Chen L, Li D, Zhou J, et al.Duplicating complete dentures with conventional and digital methods: comparisons of trueness and efficiency[J]. Dent J (Basel), 2022, 10(3):35. DOI: 10.3390/dj10030035.
[9] Baba NZ, Goodacre BJ, Goodacre CJ, et al.CAD/CAM complete denture systems and physical properties: a review of the literature[J]. J Prosthodont, 2021, 30(S2): 113-124. DOI: 10.1111/jopr.13243.
[10] Kattadiyil MT, Alzaid AA, Campbell S D.What materials and reproducible techniques may be used in recording centric relation? Best evidence consensus statement[J]. J Prosthodont, 2021, 30(S1): 34-42. DOI: 10.1111/jopr.13321.
[11] Goldstein GR.Centric relation: a needed reference position[J]. J Prosthodont, 2023, 32(6): 482-488. DOI: 10.1111/jopr.13603.
[12] Jo A, Kanazawa M, Sato Y, et al.A randomized controlled trial of the different impression methods for the complete denture fabrication: patient reported outcomes[J]. J Dent, 2015, 43(8): 989-996. DOI: 10.1016/j.jdent.2015.05.007.
[13] Schwindling FS, Stober T.A comparison of two digital techniques for the fabrication of complete removable dental prostheses: a pilot clinical study[J]. J Prosthet Dent, 2016, 116(5): 756-763. DOI: 10.1016/j.prosdent.2016.03.022.
[14] Bonnet G, Batisse C, Bessadet M, et al.A new digital denture procedure: a first practitioners appraisal[J]. BMC Oral Health, 2017,17(1):155. DOI: 10.1186/s12903-017-0440-z.
[15] Rao S, Chowdhary R, Mahoorkar S.A systematic review of impression technique for conventional complete denture[J]. J Indian Prosthodont Soc, 2010,10(2):105-111. DOI: 10.1007/s13191-010-0020-2.
[16] Deng K, Chen H, Li R, et al.Clinical evaluation of tissue stops on 3D-printed custom trays[J]. Sci Rep, 2019,9(1):1807. DOI: 10.1038/s41598-018-37826-7.
[17] Regis RR, Alves CC, Rocha SS, et al.The importance of a two-step impression procedure for complete denture fabrication: a systematic review of the literature[J]. J Oral Rehabil, 2016,43(10):771-777. DOI: 10.1111/joor.12418.
[18] Chen H, Yang X, Chen L, et al.Application of FDM three-dimensional printing technology in the digital manufacture of custom edentulous mandible trays[J]. Sci Rep, 2016,6:19207. DOI: 10.1038/srep19207.
[19] Qu F, Du X, Liu WC.3D-printed custom trays with a Gothic arch for centric relation recording and definitive impression making for complete dentures: a dental technique[J]. J Prosthet Dent, 2019,121(1):32-36. DOI: 10.1016/j.prosdent.2018.01.021.
[20] Li J, Att W, Chen Z, et al.Prosthetic articulator-based implant rehabilitation virtual patient: a technique bridging implant surgery and reconstructive dentistry[J]. J Prosthet Dent, 2023,130(1):8-13. DOI: 10.1016/j.prosdent.2021.09.013.
[21] Pérez-Giugovaz MG, Mostafavi D, Revilla-León M.Additively manufactured scan body for transferring a virtual 3-dimensional representation to a digital articulator for completely edentulous patients[J]. J Prosthet Dent, 2022,128(6):1171-1178. DOI: 10.1016/j.prosdent.2021.03.011.
[22] Natsubori R, Fukazawa S, Chiba T, et al.In vitro comparative analysis of scanning accuracy of intraoral and laboratory scanners in measuring the distance between multiple implants[J]. Int J Implant Dent, 2022,8(1):18. DOI: 10.1186/s40729-022-00416-4.
[23] Elliott T, Hamilton A, Griseto N, et al.Additively manufactured surgical implant guides: a review[J]. J Prosthodont, 2022, 31(S1): 38-46. DOI: 10.1111/jopr.13476.
[24] 孟玉坤. 无牙颌全口义齿咬合重建的关键问题[J].中国实用口腔科杂志, 2010, 3(6): 326-330. DOI:10.3969/j.issn.1674-1595.2010.06.003.
[25] Solaberrieta E, Mínguez R, Barrenetxea L, et al.Direct transfer of the position of digitized casts to a virtual articulator[J]. J Prosthet Dent, 2013, 109(6): 411-414. DOI: 10.1016/S0022-3913(13)60330-3.
[26] Petre A, Drafta S, Stefanescu C, et al.Virtual facebow technique using standardized background images[J]. J Prosthet Dent, 2019,121(5):724-728. DOI: 10.1016/j.prosdent.2018.07.008.
[27] Kois JC, Kois DE, Zeitler JM, et al.Digital to analog facially generated interchangeable facebow transfer: capturing a standardized reference position[J]. J Prosthodont, 2022, 31(S1): 13-22. DOI: 10.1111/jopr.13437.
[28] Lam W, Hsung R, Choi W, et al.A clinical technique for virtual articulator mounting with natural head position by using calibrated stereophotogrammetry[J]. J Prosthet Dent, 2018,119(6):902-908. DOI: 10.1016/j.prosdent.2017.07.026.
[29] Raffone C, Gianfreda F, Antonacci D, et al.Chairside virtual patient protocol. Part 3: in vitro accuracy of a digital facebow[J]. J Dent, 2023, 137: 104622. DOI: 10.1016/j.jdent.2023.104622.
[30] Nahm KY, Kim Y, Choi YS, et al.Accurate registration of cone-beam computed tomography scans to 3-dimensional facial photographs[J]. Am J Orthod Dentofacial Orthop, 2014,145(2):256-264. DOI: 10.1016/j.ajodo.2013.10.018.
[31] Dong T, Xia L, Cai C, et al.Accuracy of in vitro mandibular volumetric measurements from CBCT of different voxel sizes with different segmentation threshold settings[J]. BMC Oral Health, 2019,19(1):206. DOI: 10.1186/s12903-019-0891-5.
[32] Eliliwi M, Bazina M, Palomo JM. kVp, mA, and voxel size effect on 3D voxel-based superimposition[J]. Angle Orthod, 2020,90(2):269-277. DOI: 10.2319/012719-52.1.
[33] Elshebiny T, Morcos S, Mohammad A, et al.Accuracy of three-dimensional soft tissue prediction in orthognathic cases using dolphin three-dimensional software[J]. J Craniofac Surg, 2019, 30(2): 525-528. DOI: 10.1097/SCS.0000000000005037.
[34] Raffone C, Gianfreda F, Bollero P, et al.Chairside virtual patient protocol. Part 1: free vs guided face scan protocol[J]. J Dent, 2022,116:103881. DOI: 10.1016/j.jdent.2021.103881.
[35] Raffone C, Gianfreda F, Pompeo MG, et al.Chairside virtual patient protocol. Part 2: management of multiple face scans and alignment predictability[J]. J Dent, 2022, 122: 104123. DOI: 10.1016/j.jdent.2022.104123.
[36] Lepidi L, Chen Z, Ravida A, et al.A full-digital technique to mount a maxillary arch scan on a virtual articulator[J]. J Prosthodont, 2019, 28(3): 335-338. DOI: 10.1111/jopr.13023.
[37] Kim SJ, Kang YJ, Kim JH. Comparison of the accuracy of a cone beam computed tomography-based virtual mounting technique with that of the conventional mounting technique using a facebow[J]. J Prosthet Dent, 2023,S022-3913(23)00570-X. DOI: 10.1016/j.prosdent.2023.08.025.
[38] Yeung A, Jacobs R, Bornstein MM.Novel low-dose protocols using cone beam computed tomography in dental medicine: a review focusing on indications, limitations, and future possibilities[J]. Clin Oral Investig, 2019,23(6):2573-2581. DOI: 10.1007/s00784-019-02907-y.
[39] Revilla-León M, Kois DE, Zeitler JM, et al.An overview of the digital occlusion technologies: intraoral scanners, jaw tracking systems, and computerized occlusal analysis devices[J]. J Esthet Restor Dent, 2023,35(5):735-744. DOI: 10.1111/jerd.13044.

数字化颌位关系记录与转移方法的研究进展

Research progress on digital methods for recording and transferring maxillomandibular relationship

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

[1]	孙为, 施斌. 数字化技术在无牙颌患者种植治疗中的应用探索[J]. 中国口腔种植学杂志, 2023, 28(4): 217-222.
[2]	骆泯润, 白雪莹, 祝雨茜, 吴涛, 周毅. 无牙颌金属种植导板精度分析的病例系列[J]. 中国口腔种植学杂志, 2023, 28(4): 223-228.
[3]	张思慧, 陈威夷, 蔡琴, 林宇轩, 陈江. 比较全程引导与半程引导机器人技术对无牙颌种植精度的影响[J]. 中国口腔种植学杂志, 2023, 28(4): 229-232.
[4]	马博文, 林潇, 耿威. 三维扫描结合CBCT配准技术实现无牙颌全程数字化即刻种植修复的效果评估[J]. 中国口腔种植学杂志, 2023, 28(4): 233-238.
[5]	黎植文, 杜冰冉, 林媛, 潘耀鹏, 金刘莉, 张雪洋. 无牙颌种植义齿修复咬合接触设计的研究进展[J]. 中国口腔种植学杂志, 2023, 28(4): 239-243.
[6]	陶宝鑫, 汪文颖, 吴轶群. 颧种植手术机器人的研发及应用进展[J]. 中国口腔种植学杂志, 2023, 28(3): 193-197.
[7]	赵瑜越, 黄雁红, 黄英, 陈潇, 容明灯, 张雪洋. 无牙颌种植修复中的牙合学要素[J]. 中国口腔种植学杂志, 2021, 26(6): 400-404.
[8]	张思慧, 刘向东, 何凯讯, 吴玲, 陈江. 以功能为导向的全程数字化种植咬合重建一例[J]. 中国口腔种植学杂志, 2021, 26(2): 102-108.
[9]	刘向东, 张思慧, 何凯讯, 罗家坤, 陈江. 口内电阻焊接在无牙颌种植修复中的应用[J]. 中国口腔种植学杂志, 2021, 26(2): 120-123.
[10]	李军, 张俊花, 孙丽华, 张宾, 刘童斌. 老年无牙颌患者应用locator 种植覆盖义齿的回顾研究[J]. 中国口腔种植学杂志, 2020, 25(2): 64-68.
[11]	范庆莲, 董凯, 王维峰. 六手护理配合在全口即刻种植修复中的应用探讨[J]. 中国口腔种植学杂志, 2019, 24(2): 89-91.