医护四手操作配合模式在口内冷焊接技术中的应用

doi:10.12337/zgkqzzxzz.2021.10.005

中国口腔种植学杂志 ›› 2021, Vol. 26 ›› Issue (5): 294-298.DOI: 10.12337/zgkqzzxzz.2021.10.005

医护四手操作配合模式在口内冷焊接技术中的应用

夏薇, 王雅蓉, 赵瑜越, 汪雪娇, 容明灯, 陈潇

南方医科大学口腔医院,广州 510000

收稿日期:2021-07-28 出版日期:2021-10-30 发布日期:2021-11-12
通讯作者: 陈潇,Email: 263949878@qq.com,电话：020-34314299
作者简介:夏薇,本科、种植修复组组长,研究方向：种植修复的临床及护理教学培训工作;陈潇,硕士、主治医师,研究方向：全程数字化前牙美学区修复

Medical personnel cooperation during intraoral welding technique

Xia Wei, Wang Yarong, Zhao Yuyue, Wang Xuejiao, Rong Mingdeng, Chen Xiao

Department of Periodontology and Oral Implantology, Stomatological Hospital, Southern Medical University, Guangzhou 510000, China

Received:2021-07-28 Online:2021-10-30 Published:2021-11-12
Contact: Chen Xiao, Email: 263949878@qq.com, Tel: 0086-20-34314299

摘要/Abstract

摘要： 目的总结口内冷焊接技术中,高质量的四手操作医护配合的经验与体会。方法选择2020年1月至2021年7月在南方医科大学口腔医院牙周种植科行口内冷焊接技术修复的10例患者,所有患者在种植手术当天均在口内焊接钛支架,并且于1周内完成钛支架支持的即刻固定修复。通过口内焊接技术的适应证、术前准备、术中配合及术后护理,总结四手操作在口内冷焊接过程中护理配合的经验与体会。结果 10例患者均无术中或术后并发症,采用精细的护理可降低临床上并发症发生率,术后回访取得良好的患者满意度,缩短了治疗疗程。结论口内冷焊接技术已被证明是一种具有可预期性的修复方式,在口内冷焊接之前进行充分的沟通与心理疏导、完善的术前准备、熟练的医护四手操作配合、完善的操作细节,是口内冷焊接高效而安全实施的必要条件。

关键词: 口内冷焊接技术, 医护配合, 四手操作

Abstract: Purpose The aim of this study was to summarize the experience and learning of high-quality nursing during intraoral welding. Methods From January 2020 to now, there were a total of 10 patients with fully edentulous patients. All the patients received the same day of surgery and installed a fixed, full-arch, or partial-arch prosthesis supported by an intraorally welded titanium framework created directly in the patient’s mouth using a titanium bar within one week. By analyzing the indications, preoperative preparation, intraoperative cooperation, and postoperative nursing cooperation of the welding technology, the nursing experience and experience of the four-hand operation in this process were summarized. Results All 10 patients received effective welding procedures after operations without operating or after-operating complications. Nursing cooperation was effective and essential during the perioperative period. Conclusion High predictability with welded titanium framework can be expected under certain circumstances. Sufficient explanation, preoperative preparation, and familiarity with nursing procedures and details before welding are necessary for efficient and safe implementation.

Key words: Intraoral welding, Medical personnel cooperation, Four-handed technique

夏薇,王雅蓉,赵瑜越,等. 医护四手操作配合模式在口内冷焊接技术中的应用[J]. 中国口腔种植学杂志, 2021, 26(5): 294-298. DOI: 10.12337/zgkqzzxzz.2021.10.005

Xia Wei, Wang Yarong, Zhao Yuyue, Wang Xuejiao, Rong Mingdeng, Chen Xiao. Medical personnel cooperation during intraoral welding technique[J].Chinese Journal of Oral Implantology, 2021, 26(5): 294-298.DOI: 10.12337/zgkqzzxzz.2021.10.005.

参考文献

[1] Bousquet P, Carayon D, Durand JC.Using the “one shot” concept for immediate loading implant protocol in edentulous patient rehabilitation with a fixed prosthesis: A 6-year follow-up[J]. Case Rep Dent, 2021,2021:8872277. DOI: 10.1155/2021/8872277.
[2] 顾新华. 萎缩无牙颌患者数字化种植即刻修复工作流程[J].口腔疾病防治,2020,28(12):749-758. DOI: 10.12016/j.issn.2096-1456.2020.12.001.
[3] Degidi M, Gehrke P, Spanel A, et al.Syncrystallization: a technique for temporization of immediately loaded implants with metal-reinforced acrylic resin restorations[J]. Clin Implant Dent Relat Res, 2006,8(3):123-134. DOI: 10.1111/j.1708-8208.2006.00011.x.
[4] Degidi M, Nardi D, Piattelli A.Immediate rehabilitation of the edentulous mandible with a definitive prosthesis supported by an intraorally welded titanium bar[J]. Int J Oral Maxillofac Implants, 2009,24(2):342-347.
[5] Degidi M, Nardi D, Piattelli A.Prospective study with a 2-year follow-up on immediate implant loading in the edentulous mandible with a definitive restoration using intra-oral welding[J]. Clin Oral Implants Res, 2010,21(4):379-385. DOI: 10.1111/j.1600-0501.2009.01865.x.
[6] Degidi M, Nardi D, Morri A, et al.Fatigue limits of titanium-bar joints made with the laser and the electric resistance welding techniques: microstructural characterization and hardness properties[J]. Proc Inst Mech Eng H, 2017,231(9):839-850. DOI: 10.1177/0954411917709835.
[7] Degidi M, Caligiana G, Francia D, et al.Strain gauge analysis of implant-supported, screw-retained metal frameworks: comparison between different manufacturing technologies[J]. Proc Inst Mech Eng H, 2016,230(9):840-846. DOI: 10.1177/0954411916653623.
[8] 周磊, 岳新新. All-on-four技术在口腔种植领域中的应用进展[J].口腔疾病防治,2017,25(1):1-7. DOI: 10.12016/j.issn.2096-1456.2017.01.001.
[9] Lento D, Piva A, Beltramini G, et al. Oral rehabilitation of maxilla: technical consideration[J]. J Biol Regul Homeost Agents, 2020,34(1 Suppl. 1):115-117. DENTAL SUPPLEMENT.
[10] Chen J.[the significance and evaluation of precise passive fit of implant restorations, and the application of intraoral welding technology][J]. Zhonghua Kou Qiang Yi Xue Za Zhi, 2020,55(11):825-830. DOI: 10.3760/cma.j.cn112144-20200622-00358.
[11] Celletti R, Fanali S, Laici CU, et al.Instant loading with intraoral welding technique and PRAMA implants: a new prosthetic approach[J]. J Biol Regul Homeost Agents, 2017,31(4):1127-1131.
[12] Lento D, Piva A, Beltramini G, et al. Oral rehabilitation of maxilla: technical consideration[J]. J Biol Regul Homeost Agents, 2020,34(1 Suppl. 1):115-117. DENTAL SUPPLEMENT.
[13] Degidi M, Nardi D, Sighinolfi G, et al.Immediate rehabilitation of the edentulous mandible using ankylos syncone telescopic copings and intraoral welding: a pilot study[J]. Int J Periodontics Restorative Dent, 2012,32(6):e189-194.
[14] Bacchiocchi D, Guida A.The ball welding bar: A new solution for the immediate loading of screw-retained, mandibular fixed full arch prostheses[J]. Int J Dent, 2017,2017:2679085. DOI: 10.1155/2017/2679085.
[15] Ceschini L, Boromei I, Morri A, et al.Microstructural characterization and hardness properties of electric resistance welding titanium joints for dental applications[J]. Proc Inst Mech Eng H, 2015,229(6):429-438. DOI: 10.1177/0954411915585598.
[16] Degidi M, Nardi D, Piattelli A, et al.Immediate loading of zygomatic implants using the intraoral welding technique: a 12-month case series[J]. Int J Periodontics Restorative Dent, 2012,32(5):e154-161.
[17] Degidi M, Nardi D, Sighinolfi G, et al.In vitro infrared thermography assessment of temperature peaks during the intra-oral welding of titanium abutments[J]. Infrared Physics & Technology, 2012, 55(4):279-283.
[18] Albiero AM, Benato R, Benato A, et al.Use of intraoral welding to increase the predictability of immediately loaded computer-guided implants[J]. Int J Periodontics Restorative Dent, 2017,37(4):591-598. DOI: 10.11607/prd.3027.
[19] Albiero AM, Benato R.Computer-assisted surgery and intraoral welding technique for immediate implant-supported rehabilitation of the edentulous maxilla: case report and technical description[J]. Int J Med Robot, 2016,12(3):453-460. DOI: 10.1002/rcs.1715.
[20] Albiero AM, Benato R, Fincato A.Immediately loaded intraorally welded complete-arch maxillary provisional prosthesis[J]. Int J Periodontics Restorative Dent, 2015,35(5):725-731. DOI: 10.11607/prd.2293.
[21] 邓伟华, 陈广盛. 心理护理配合香薰疗法在口腔种植术中临床效果的评价[J].中国口腔种植学杂志,2017,22(3):134-136.
[22] 彭贵雪. 人工种植牙手术的护理配合及对手术成功率的影响[J].中国口腔种植学杂志,2020,25(4):169-171. DOI: 10.3969/j.issn.1007-3957.2020.04.006.
[23] Pasqualini ME, Lauritano D, Rossi F, et al.Rehabilitations with immediate loading of one-piece implants stabilized with intraoral welding[J]. J Biol Regul Homeost Agents, 2018,32(2 Suppl. 1):19-26.

医护四手操作配合模式在口内冷焊接技术中的应用

Medical personnel cooperation during intraoral welding technique

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics